Indicator Light

Product Details:

The indicator consists of an armature which rotates between the poles of an electro magnet. The indicator pointer which is black in colour, is fixed to the armature and turns against a white background. When the circuit breaker or isolator is in closed position, the pointer bridges the gap between the lines and provide continuity in the mimic diagram. When the circuit breaker or isolator is in open position, it takes up a position which is at right angles to the mimic. If the supply to the indicator fails, then it takes up an intermediate position i.e. at 45°.

The indicator is housed in a cylindrical moulded case and is designed essentially for flush mounting on control panels. A mounting clamp is provided on the case for fixing on to the panel.

Semaphore indicator is available in two versions viz. JAV 041 is used for circuit breakers and a beezel diameter of 63mm, type JAV 042 is used for isolators& earth switches and has a beezel diameter of 48mm. However, the panel cut out dimension is 41mm dia, which is the same for both the types. The indicator coil is basically designed for 24/30V DC rating. For 48V, 110V & 220V DC application, a screw type series resistor is supplied which can be directly screwed on to a terminal of the semaphore.

Additional Information:

• Production Capacity: 100
• Delivery Time: Ready Stock

Product Details:

• Features led indicators utilise multi-chip technology to provide bright even colours in red and green
• Additional features provides bright even illumination across the pilot light surface, easily visible even in brightly lit areas, long life, means reduced maintenance as no bulbs to replace
• Specifications working voltage: 220 V AC or 220 V Dc
• Quantity one piece each of red and green led indicator light
• Applications used as indicating, foretelling, accident and other signals in the lines of types of equipment, an aesthetically appealing design features single back-of-panel lock-nut fixing and screw clamp terminals for easy mounting and connection

Product Details:

• Features led indicators utilise multi-chip technology to provide bright even colours in red and green
• Additional features provides bright even illumination across the pilot light surface, easily visible even in brightly lit areas, long life, means reduced maintenance as no bulbs to replace
• Specifications working voltage: 220 V AC or 220 V Dc
• Quantity one piece each of red and green led indicator light
• Applications used as indicating, foretelling, accident and other signals in the lines of types of equipment, an aesthetically appealing design features single back-of-panel lock-nut fixing and screw clamp terminals for easy mounting and connection

Product Details:

• Features led indicators utilise multi-chip technology to provide bright even colours in red and green
• Additional features provides bright even illumination across the pilot light surface, easily visible even in brightly lit areas, long life, means reduced maintenance as no bulbs to replace
• Specifications working voltage: 220 V AC or 220 V Dc
• Quantity one piece each of red and green led indicator light
• Applications used as indicating, foretelling, accident and other signals in the lines of types of equipment, an aesthetically appealing design features single back-of-panel lock-nut fixing and screw clamp terminals for easy mounting and connection

Product Details:

JVS LED indicator lights can be installed on any circuit breaker panel. Their simple installation mounts in any thickness material. They can also be used as general indicator and alarm lights. LEDs draw very little power compared to regular incandescent bulbs and remain cool to the touch, making these indicator lights ideal for helm installations.

Available in 3 different volt ranges: 12 through 24 Volt DC, 110 Volt DC and 220 Volt DC

Product Details:

• Features led indicators utilise multi-chip technology to provide bright even colours in red and green
• Additional features provides bright even illumination across the pilot light surface, easily visible even in brightly lit areas, long life, means reduced maintenance as no bulbs to replace
• Specifications working voltage: 220 V AC or 220 V Dc
• Quantity one piece each of red and green led indicator light
• Applications used as indicating, foretelling, accident and other signals in the lines of types of equipment, an aesthetically appealing design features single back-of-panel lock-nut fixing and screw clamp terminals for easy mounting and connection

 

Product Details:

The indicator consists of an armature which rotates between the poles of an electro magnet. The indicator pointer which is black in colour, is fixed to the armature and turns against a white background. When the circuit breaker or isolator is in closed position, the pointer bridges the gap between the lines and provide continuity in the mimic diagram. When the circuit breaker or isolator is in open position, it takes up a position which is at right angles to the mimic. If the supply to the indicator fails, then it takes up an intermediate position i.e. at 45°.

The indicator is housed in a cylindrical moulded case and is designed essentially for flush mounting on control panels. A mounting clamp is provided on the case for fixing on to the panel.

Semaphore indicator is available in two versions viz. JAV 041 is used for circuit breakers and a beezel diameter of 63mm, type JAV 042 is used for isolators& earth switches and has a beezel diameter of 48mm. However, the panel cut out dimension is 41mm dia, which is the same for both the types. The indicator coil is basically designed for 24/30V DC rating. For 48V, 110V & 220V DC application, a screw type series resistor is supplied which can be directly screwed on to a terminal of the semaphore.

Additional Information:

• Item Code: JAV044
• Production Capacity: 100
• Delivery Time: Ready Stock
• Packaging Details: Loose

Product Details:

JVS LED indicator lights can be installed on any circuit breaker panel. Their simple installation mounts in any thickness material. They can also be used as general indicator and alarm lights. LEDs draw very little power compared to regular incandescent bulbs and remain cool to the touch, making these indicator lights ideal for helm installations.

Available in 3 different volt ranges: 12 through 24 Volt DC, 110 Volt DC and 220 Volt DC